Monitoring Volatile Organic Compounds in Beer Production Using the Clarus SQ 8 GC/MS and TurboMatrix Headspace Trap Systems
Beer is a popular beverage produced by the fermentation of hopped malt extracted from barley and other grains. Although simple in concept, beer is a highly complex mixture of many compounds, including sugars, proteins, alcohols, esters, acids, ketones, acids and terpenes. Flavor is an important quality of any beer and the chemical content of the beer is obviously responsible for that flavor. Aroma is an extremely important part of the flavor, so there is a strong interest by brewers in the volatile organic compounds (VOCs) in beer that affect its aroma.
Some VOCs have a positive effect on aroma (attributes) and some have a negative effect (defects). The ability to characterize these in beer products before, during and after fermentation would be an important tool in process control, quality assurance and product development.
This application note describes a system comprising a headspace trap sampler to extract and concentrate VOCs from a beer sample and deliver them to gas chromatography/mass spectrometry (GC/MS) for separation, identification and quantification.
The purpose of our experiments is to demonstrate that attributes and defects can all be monitored using one detector and from a single injection with MS. The associated benefits include a quicker return on investment, enhanced productivity, more information from a single analysis, and less bench space requirements.
Instrumentation
In this analysis, we utilized a headspace trap system for sample introduction to characterize the flavor of beer. This technique ensures that non-volatile material in beer does not enter the analytical system, which can cause system contamination. The headspace trap extracts the volatile components from a large sample and focuses them onto an inline adsorbent trap. It also facilitates very easy sample preparation—a volume of beer is dispensed into a vial and sealed. The subsequent analysis is then fully automated.
A PerkinElmer® TurboMatrix™ Headspace Trap connected to a PerkinElmer Clarus® SQ 8 GC/MS was used for these experiments. Using a headspace trap instead of the classical headspace technique enables up to 100-times improved detection limits over classical headspace methods.
A slightly polar 60 m × 0.25 mm × 1.0 μm Elite 5 (5% phenyl-silicone) column was used. This thick-film column provided sufficient retention to separate the early-eluting most volatile components and provided the dynamic range necessary to chromatograph both high- and low-level components in the beer.
Experimental
Overview
Several experiments were performed that are key to the brewing industry:
• Quantitation of dimethyl sulfide (DMS), 2,3-butanedione (diacetyl), 2,3-pentandione and t-2-nonenal.
• Characterization of several types of beers
• Fermentation profiling
• Analysis of raw materials
• Aging studies
Analytical Method
The experimental conditions for this analysis are given in Tables 1 to 4.